Prebuilts typically arrive in 2-3 days after purchase. Or around a week to WA.
Favourite and Custom Builds typically take 1-2 weeks total, or 2-3 if you live in WA.
Sure can! From Catherine Hill Bay 2281 NSW. When your computer is built we will text/email you the address of the workshop for pickup.
You sure do, as TNT and Auspost both require signature on delivery. The person that signs must be the same person on the shipping address. If you miss the delivery, no stress, just have to pick it up from the local Auspost or TNT Depot. Or can request re-delivery for $30.
The computers are sent with shipping insurance, please take photos of any damaged parcels before opening the box, a video unboxing is even better if you suspect the computer has been dropped etc.
We offer affilate revenue, so you can get in contact to recieve your own Coupon code, giving your followers a discount. But we do not send free computers with exposure as payment.
Typically our cheapest computer is the $900 Budget build in our Favourite Builds list
However, sometimes we get $700-800 systems too, which will appear in our Prebuilt List, those are usually refurbished.
No. lol.
- PC power cable
- Wifi / bluetooth antennas if applicable
- The spare cables for modular power supplies
- SATA cables for extra SSDs / HDDs
- Any RGB remote controllers / accessories needed
Note: HDMI / DisplayPort cables come with your monitor.
Warranty on NEW PC's: 3 YEARS
Warranty on REFURBISHED PC's: 1 YEAR
For return policy refer to:
Get in contact via hello@lakescustom.com.au we likely have a copy if its within 3 years.
During checkout you'll see a box to input your code
Yes, contact us to organise it :)
If you are meant to have wifi, and its slow or not working follow the below steps:
If no luck, shoot us a message ↘
Just remember it will only show a display on the graphics card ports (Horizontal ports), not the hdmi on the motherboard (Vertical ports)
Then restart :)
Still no luck?
Make sure the monitor is set to the right input (For example if you are using a HDMI cable, make sure the monitor is set to HDMI in its menu)
You can try unplugging the main power cord, leaving the back switch set to (I), then hold the power button for 10 seconds. Plug the power cord back in, and try turn her on.
Still no luck?
This trick may help. You can take the glass off, and take out both RAM sticks, then, insert only one stick back into the second slot. And try turn her on.
This video will help:
If it turns on with the RAM in the second slot, then turn it off normally, insert the rest of the RAM (if you have 2x sticks, the second stick goes in the 4th/last slot). Then turn it on 😊
If not, shoot us a message ↘
Perform a power drain by disconnecting the power cables from the computer, and then hold the power button for 10-15 seconds to discharge "residual power." Then connect back the power cables and try to turn the computer on.
If no luck, you can take the glass off, and take out both RAM sticks, then, insert only one stick back into the second slot. And try turn her on.
This video will help:
If it turns on with the RAM in the second slot, then turn it off normally, insert the rest of the RAM (if you have 2x sticks, the second stick goes in the 4th/last slot). Then turn it on 😊
Can also try a different wall socket, somewhere else in the house
Can also try without all USBs, just leave the power and display cables in (HDMI / DP etc)
If no luck, shoot us a message ↘
Got you covered, follow these steps in order:
https://photos.app.goo.gl/CCcYaYLkxuQDNErZ8
If no luck, shoot us a message ↘